dl2_012_Missed dart detector does not work

1. Go to the test menu and perform I/O board testing.
Turn the DIP switches 1 and 3 on to enter the test menu.

Picture: Location of DIP switches

2. Tap the outboard section to identify which sensor does not respond.

3. Reconnect the non-responding sensors to other connectors.
The connectors for the missed dart detector's sensors are CN7, CN8, CN9, and CN10.
1) If it fixes the problem, the problem could be in the I/O board.

2) If a specific sensor doesn't respond even after reconnecting it with another connector, the problem could be in the I/O board.

In either case, it requires a part replacement. Please call our sales representative.

Reference : Page 5 of the Support Manual「アウトボードが反応しない」

* You can browse the Support Manual in the PDF compatible environment only.