dl2_008_Credit does not increase

1. Mechanical coin selector (e.g. : DX, EX-F, DL2-CVT, DL1-CVT)

・Is the coin selector properly connected?
・Is it correctly wired to the I/O board?
Coin selector uses the J10 3-pin connector
See here for the detail.

Picture: Location of the J10 connector
Please check the "J10" written on the I/O board in small text.

2. Digital coin selector (e.g. : EX )

・Is the coin selector properly connected?
・Is it correctly wired to the I/O board?
・IS the reference coin set in the coin selector properly seated? No tilted?

Picture: Reference coin positioning Note : The digital coin selector has a sensitivity adjustment control.
To adjust it, see here for details.

Reference : Page 19 of the Support Manual「クレジットがあがらない(機械式コインセレクター)」

Reference : Page 22 of the Support Manual「クレジットがあがらない(電子式コインセレクター)」

* You can browse the Support Manual in the PDF compatible environment only.