dl2_005_An error screen is displayed

1. Error with the card reader, I/O board or others

The cables are not properly connected. Check the wiring.

1) Error with the card reader
Are the cables properly connected to the right ports on the PC; COM1 and COM2?
Switching the cables from one port to another may solve the issue. See the instruction manual for details.

Picture: Connection ports on different PC types toshiba advantec V1

2) I/O board error
Is the USB properly connected to the PC and I/O board?
Unplugging and plugging the cable back in may fix the problem.

2. It shows a message: Starting 100. (DL2 series only)

There might be a network or PC failure.
See here for details.

Reference : Page 3 of the Support Manual「I/Oボード接続確認中と表示される」
Reference : Page 52 of the Support Manual「起動時にStarting100で止まる」

* You can browse the Support Manual in the PDF compatible environment only.